Pair of heating cartridges

Item number: HP

Spare part without switch or electronics

Category: Spare Parts & Components

Installation Preparation

105,95 €

including19% VAT. , plus shipping

Available now!

There are variations of this item. Please select the variation you wish.



This productconsists only of the heating cartridges as a spare part for our grip heatings type Standard andComfort or for an installtion with a third-party switch.
Heat resistant adhesive is included.


  • Replacement of the original Coolride heating cartridges, e.g. when changing handlebars
  • Installation on a KTM with on-board computer and heated grip control
  • Installation on older BMW models (from 1985) with original BMW heated grip switch (you will also need the modification kit 50%)
  • Use of another compatible switch instead of the Coolride 2-step switch (you willalso need the 50% modificationkit)

Coolride heated grips on a KTM

Ownersof a KTM with an on-board computer and preparation for original KTM heated grips onlyrequire this product. The on-board computercan be used to controlthe heating cartridges. Suitable for retrofitting or as a replacement for the KTM heated grips. Suitable for the large KTM V2 models like Adventure and Super Duke. As always, please determine the inside diameter of the handlebars carefullyand choose the appropriate size of heating cartridges. See also our FAQ.

Electrical Connection

Use the includedbullet style connectors for connecting the cartridgesto thealready existing Coolride installation on your motorcylce. Formore information refer to the included manual.

Scope of supply

  • 2 heating cartridges, 26W each = 52W total power, 90mm long
  • Power cable made from heat and cold proof FEP, 120cm long
  • 6 fitted insulated spacer discs
  • 1 grommet made from rubber
  • 4 complete bullet style connector sets incl. insulating sleeves
  • 1 portion pack 2-component adhesive
  • 1 installation instruction with wiring diagram

Optional Modifications

To increase the lower power level of thegrip heating system from 25% to 50% power, you can use the Coolridemodification kit 50%. The modification kit can be connected to an existing system at any time.

With the modification kit it is also possible to use other toggle and rocker switches than the one supplied. It is also possible to use switches that already exist on the vehicle, e.g. to use the original BMWhot grip switch, provided that it meets the technical requirements. Information on this can be found in the modification kit's Manual.

Montage- und Betriebsanleitung

Anleitung zur Montage der Heizpatronen und des Griffheizungssystems Standard

Montage- und Betriebsanleitung


Average product review

Share your experience with other customers: